Active 19” rack AudioPressBox distribution Drive Unit, Dante Interface - 2 channels, 2 LINE Inputs, 4 buffered Outputs for 12 AudioPressBox expanders
APB-D200 R-D features Analogue and DANTE inputs with high-quality digital-to analogue converters, supporting a range of sample rates and bit depths. It can provide a hardware master clock for a Dante network. As with other Dante products, the freely available Dante Controller software application is used to automatically discover and configure APB-Dante devices connected to the Dante network. Device names, channel labels, signal routing and other parameters (for example, sample rate and latency) can be configured via the network using Dante Controller. A variety of network and clock synchronisation diagnostic tools are also available in Dante Controller.
APB-Dante products use Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector.
PoE Power Consumption: < 2 Watt
CAUTION– If using a PoE injector, it must be IEEE 802.3af compliant. Use of a non-compliant PoE injector can terminally damage the device and may void the warranty.
Available Software Options:
Dante Controller
Dante Via
Dante Virtual Soundcard
Professional active 19'' rack AudioPressBox Drive unit • DANTE interface - 2 channels • 2 balanced LINE Inputs • Switchable High-Pass filter • Switchable Compressor and Limiter for Input channel • 4 separately buffered Outputs for 12 AudioPressBox 8-output expanders.
Drive unit for : APB-008 SB-EX, APB-008 IW-EX, APB-008 OW-EX, APB-008 FB-EX, APB-024 R-EX, APB-P008 OW-EX, APB-P008 IW-EX
